CONSTANTS	CONSTANTS (5)	- constants for LAM Fortran programming
INTROF		INTROF (2)	- introduction to LAM Fortran programming routines
LAM		LAM (7) 	- introduction to Local Area Multicomputer (LAM)
MPI		MPI (7) 	- LAM MPI implementation
MPIL_Comm_gps	MPIL_Comm_id (2)    - Get useful LAM information from opaque MPI objects.
MPIL_Comm_id	MPIL_Comm_id (2)    - Get useful LAM information from opaque MPI objects.
MPIL_Parent	MPIL_Spawn (2)	- Spawn MPI processes under LAM.
MPIL_Signal	MPIL_Signal (2) - Signal MPI processes under LAM.
MPIL_Spawn	MPIL_Spawn (2)	- Spawn MPI processes under LAM.
MPIL_Trace_off	MPIL_Trace_on (2)   - Start and stop LAM/MPI application tracing.
MPIL_Trace_on	MPIL_Trace_on (2)   - Start and stop LAM/MPI application tracing.
MPIL_Type_id	MPIL_Comm_id (2)    - Get useful LAM information from opaque MPI objects.
MPIL_Universe_size		MPIL_Spawn (2)	- Spawn MPI processes under LAM.
MPI_Spawn	MPI_Spawn (2)	- Spawn MPI processes under LAM.
TRROR		TRROR (2)	- Print LAM system error message.
_kexit		kexit (2)	- Terminate LAM process.
all_hash	all_hash (3)	- general purpose hash table management (LAM)
all_list	all_list (3)	- general purpose list management package (LAM)
all_opt 	all_opt (3)	- general purpose command\-line options parsing (LAM)
all_queue	all_queue (3)	- general purpose queue management package (LAM)
all_shash	all_hash (3)	- general purpose hash table management (LAM)
all_slist	all_list (3)	- general purpose list management package (LAM)
all_squeue	all_queue (3)	- general purpose queue management package (LAM)
appschema	appschema (5)	- LAM application schema format
atkexit 	kexit (2)	- Terminate LAM process.
bfctl		bfctl (1)	- Control LAM buffers.
bfstate 	bfstate (1)	- Report status of LAM buffers.
bhost		bhost (5)	- LAM boot schema (host file) format
conf		conf (5)	- LAM node process schema
doom		doom (1)	- Deliver a signal to a LAM process.
drecv		dsend (2)	- Send and receive LAM datalink messages.
dsend		dsend (2)	- Send and receive LAM datalink messages.
dtry_recv	dsend (2)	- Send and receive LAM datalink messages.
dtry_send	dsend (2)	- Send and receive LAM datalink messages.
fctl		fctl (1)	- Control a LAM remote file daemon.
fstate		fstate (1)	- Report information on LAM remote file daemon.
getnall 	getnodeid (2)	- Get information on LAM nodes.
getncomp	getnodeid (2)	- Get information on LAM nodes.
getnodeid	getnodeid (2)	- Get information on LAM nodes.
getnodes	getnodes (2)	- Get array of LAM node identifiers.
getnodetype	getnodeid (2)	- Get information on LAM nodes.
getnotb 	getnodeid (2)	- Get information on LAM nodes.
getntype	getnodeid (2)	- Get information on LAM nodes.
getorigin	getnodeid (2)	- Get information on LAM nodes.
getrent 	getrent (2)	- Get LAM route information.
getrentc	getrent (2)	- Get LAM route information.
getroute	getrent (2)	- Get LAM route information.
getroute2	getrent (2)	- Get LAM route information.
getrtype	getrent (2)	- Get LAM route information.
hboot		hboot (1)	- Start LAM on the local node.
hcc		hcc (1) 	- Compile LAM C/C++ programs.
hcp		hcc (1) 	- Compile LAM C/C++ programs.
hf77		hf77 (1)	- Compile LAM FORTRAN programs.
introc		introc (2)	- introduction to LAM C programming functions
introu		introu (1)	- introduction to LAM user interface commands
kattach 	kattach (2)	- Attach/detach a process to/from the local LAM daemon.
kcreate 	kcreate (2)	- Create a LAM process from an executable program.
kdetach 	kattach (2)	- Attach/detach a process to/from the local LAM daemon.
kdoom		kdoom (2)	- Deliver a signal to a LAM process.
kenter		kenter (2)	- Enter process into LAM session.
kexit		kexit (2)	- Terminate LAM process.
kinit		kinit (2)	- Initialize a LAM process.
krecv		ksend (2)	- Send and receive local node LAM messages.
ksend		ksend (2)	- Send and receive local node LAM messages.
ksr		ksend (2)	- Send and receive local node LAM messages.
kstate		kstate (2)	- Get synchronization status of a LAM process.
lam-helpfile	lam-helpfile (5)    - LAM help message file
lam_kpause	lam_ksigblock (2)   - Manipulate LAM signal handling policy.
lam_ksigblock	lam_ksigblock (2)   - Manipulate LAM signal handling policy.
lam_ksignal	lam_ksignal (2) - Specify a signal handler for a LAM signal.
lam_ksigretry	lam_ksigblock (2)   - Manipulate LAM signal handling policy.
lam_ksigsetmask lam_ksigblock (2)   - Manipulate LAM signal handling policy.
lam_ksigsetretry		lam_ksigblock (2)   - Manipulate LAM signal handling policy.
lam_rfposix	lam_rfposix (2) - LAM POSIX-like remote file service
lam_rfstate	lam_rfstate (2) - Report status of remote LAM file descriptors.
lam_rtrfforget	lam_rtrget (2)	- Unload LAM trace data.
lam_rtrfget	lam_rtrget (2)	- Unload LAM trace data.
lam_rtrforget	lam_rtrget (2)	- Unload LAM trace data.
lam_rtrget	lam_rtrget (2)	- Unload LAM trace data.
lam_rtrstore	lam_rtrstore (2)    - Store LAM trace data.
lam_rtrsweep	lam_rtrsweep (2)    - Remove LAM trace data.
lam_rtrudie	lam_rtrsweep (2)    - Remove LAM trace data.
lam_rtrwipe	lam_rtrsweep (2)    - Remove LAM trace data.
lamboot 	lamboot (1)	- Start a LAM multicomputer.
lamclean	lamclean (1)	- Attempt to clean entire LAM system.
lamf_rfclose	lamf_rfopen (2) - Open or close a remote file. (LAM)
lamf_rfopen	lamf_rfopen (2) - Open or close a remote file. (LAM)
lamf_rfread	lamf_rfread (2) - Read/write data from/to a remote file. (LAM)
lamf_rfwrite	lamf_rfread (2) - Read/write data from/to a remote file. (LAM)
lamgrow 	lamgrow (1)	- Extend a LAM multicomputer.
lamshrink	lamshrink (1)	- Shrink a LAM multicomputer.
lamtrace	lamtrace (1)	- Unload LAM trace data.
libmpi		libmpi (3)	- LAM MPI implementation
libtstdio.a	libtstdio.a (3) - flexible LAM standard I/O package
loadgo		loadgo (1)	- Run programs on LAM nodes.
lpattach	lpattach (2)	- Attach, detach a LAM process from remote process management.
lpdetach	lpattach (2)	- Attach, detach a LAM process from remote process management.
ltot		ttol (3)	- LAM data representation translation suite
mltot		ttol (3)	- LAM data representation translation suite
mpi		MPI (7) 	- LAM MPI implementation
mpiCC		hcc (1) 	- Compile LAM C/C++ programs.
mpicc		hcc (1) 	- Compile LAM C/C++ programs.
mpif77		hf77 (1)	- Compile LAM FORTRAN programs.
mpimsg		mpimsg (1)	- Monitor MPI message buffers under LAM.
mpirun		mpirun (1)	- Run MPI programs on LAM nodes.
mpitask 	mpitask (1)	- Monitor MPI processes under LAM.
mttol		ttol (3)	- LAM data representation translation suite
nprobe		nprobe (2)	- Report if a LAM bufferd network message is ready to be received.
nrecv		nsend (2)	- Send and receive LAM network messages.
nsend		nsend (2)	- Send and receive LAM network messages.
ntry_recv	nsend (2)	- Send and receive LAM network messages.
ntry_send	nsend (2)	- Send and receive LAM network messages.
precv		psend (2)	- LAM physical layer message passing (virtual circuits)
precvclose	psend (2)	- LAM physical layer message passing (virtual circuits)
precvopen	psend (2)	- LAM physical layer message passing (virtual circuits)
procschema	procschema (5)	- LAM process schema format
psend		psend (2)	- LAM physical layer message passing (virtual circuits)
psendclose	psend (2)	- LAM physical layer message passing (virtual circuits)
psendopen	psend (2)	- LAM physical layer message passing (virtual circuits)
rbflook 	rbflook (2)	- Retrieve a copy of a buffered LAM message packet.
rbfparms	rbfparms (2)	- Control LAM remote buffers.
rbfstate	rbfstate (2)	- Report status of remote LAM buffers.
rbfsweep	rbfparms (2)	- Control LAM remote buffers.
rbfsweep1	rbfparms (2)	- Control LAM remote buffers.
rbfudie 	rbfparms (2)	- Control LAM remote buffers.
rbfwipe 	rbfparms (2)	- Control LAM remote buffers.
recho		recho (2)	- Send messages to LAM echo server.
recon		recon (1)	- Check if LAM can be started.
rflat		rflat (2)	- Tag and load storage on LAM remote nodes.
rforget 	rget (2)	- Find tagged storage on a LAM remote node.
rfrmfd		rfrmfd (2)	- Control LAM specific file daemon services.
rget		rget (2)	- Find tagged storage on a LAM remote node.
rload		rload (2)	- Load a file onto a LAM remote node.
rpcreate	rpcreate (2)	- Create a LAM process on a remote node.
rpdoom		rpdoom (2)	- Signal LAM processes on a remote node.
rpgo		rpgo (2)	- Create a LAM process on a remote node from tagged storage.
rploadgo	rploadgo (2)	- Load and execute a LAM program on a remote node.
rpspawn 	rpspawn (2)	- Spawn a LAM process onto a remote node.
rpstate 	rpstate (2)	- Report status of LAM processes on a remote node.
rpwait		rpwait (2)	- Wait for a child LAM process to terminate.
rremrent	rrsetrents (2)	- Set LAM route information.
rrsetrents	rrsetrents (2)	- Set LAM route information.
state		state (1)	- Report status of LAM processes.
sweep		bfctl (1)	- Control LAM buffers.
tkill		tkill (1)	- Terminate LAM on one node.
tping		tping (1)	- Send echo messages to LAM nodes.
trecv		tsend (2)	- Send and receive LAM transport messages.
tsend		tsend (2)	- Send and receive LAM transport messages.
ttime		ttime (3)	- Get LAM timer value in seconds.
ttol		ttol (3)	- LAM data representation translation suite
wipe		wipe (1)	- Shutdown LAM.
